qurt
Wdrażany
Liczba postów: 12
|
RE: WIN7 błąd 0xc000000f podczas uruchamiania
czy ktos mi to przetlumaczy? czesto slysze osmart dysku, czy moj dysk juz ledwo zipie?
Kod:
smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD3200BEVT-75ZCT2
Serial Number: WD-WXK1AA0H5201
LU WWN Device Id: 5 0014ee 205494f7b
Firmware Version: 11.01A11
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Sun May 24 19: 19: 25 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (10800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 127) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 199 199 051 Pre-fail Always - 17126
3 Spin_Up_Time 0x0027 186 185 021 Pre-fail Always - 1658
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2163
5 Reallocated_Sector_Ct 0x0033 177 177 140 Pre-fail Always - 178
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 18875
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1899
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 221
193 Load_Cycle_Count 0x0032 092 092 000 Old_age Always - 326557
194 Temperature_Celsius 0x0022 108 077 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 149 149 000 Old_age Always - 51
197 Current_Pending_Sector 0x0032 199 199 000 Old_age Always - 55
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
240 Head_Flying_Hours 0x0032 077 077 000 Old_age Always - 17439
241 Total_LBAs_Written 0x0032 112 001 000 Old_age Always - 88428513719551
242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 56250726726
SMART Error Log Version: 1
ATA Error Count: 17712 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh: mm: SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 17712 occurred at disk power-on lifetime: 18874 hours (786 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 83 0c 06 40 Error: UNC at LBA = 0x00060c83 = 396419
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 80 0c 06 00 00 00: 06: 29.067 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 29.066 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 24.929 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 24.928 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 20.915 READ FPDMA QUEUED
Error 17711 occurred at disk power-on lifetime: 18874 hours (786 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 83 0c 06 40 Error: UNC at LBA = 0x00060c83 = 396419
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 80 0c 06 00 00 00: 06: 24.929 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 24.928 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 20.915 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 20.915 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 15.844 READ FPDMA QUEUED
Error 17710 occurred at disk power-on lifetime: 18874 hours (786 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 83 0c 06 40 Error: UNC at LBA = 0x00060c83 = 396419
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 80 0c 06 00 00 00: 06: 20.915 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 20.915 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 15.844 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 15.843 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 11.114 READ FPDMA QUEUED
Error 17709 occurred at disk power-on lifetime: 18874 hours (786 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 83 0c 06 40 Error: UNC at LBA = 0x00060c83 = 396419
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 80 0c 06 00 00 00: 06: 15.844 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 15.843 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 11.114 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 11.114 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 07.225 READ FPDMA QUEUED
Error 17708 occurred at disk power-on lifetime: 18874 hours (786 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 83 0c 06 40 Error: UNC at LBA = 0x00060c83 = 396419
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 08 80 0c 06 00 00 00: 06: 11.114 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 11.114 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 07.225 READ FPDMA QUEUED
ef 02 00 00 00 00 00 00 00: 06: 07.225 SET FEATURES [Enable write cache]
60 08 08 80 0c 06 00 00 00: 06: 03.181 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 17496 603002631
# 2 Extended offline Completed: read failure 90% 17496 603002631
# 3 Short offline Completed: read failure 90% 16415 188948290
# 4 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
Post: #10
